An experimental study on flexural behavior of corroded reinforced concrete beams using electrochemical accelerated corrosion method
Số trang: 11
Loại file: pdf
Dung lượng: 1.41 MB
Lượt xem: 8
Lượt tải: 0
Xem trước 2 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
This study investigated experimental bearing capacity of corroded reinforced concrete beams. Six testing beams were made of concrete having compressive strength of 25 MPa, with the dimensions of 80 × 120 × 1200 mm. They were divided into two groups depending of tension reinforcement ratio.
Nội dung trích xuất từ tài liệu:
An experimental study on flexural behavior of corroded reinforced concrete beams using electrochemical accelerated corrosion method
Nội dung trích xuất từ tài liệu:
An experimental study on flexural behavior of corroded reinforced concrete beams using electrochemical accelerated corrosion method
Tìm kiếm theo từ khóa liên quan:
Reinforced concrete beam Electrochemical accelerated corrosion Corrosion rate Load-carrying capacity Concrete crackingGợi ý tài liệu liên quan:
-
Lecture Prestressed concrete: Section 3 - Design of post ‐ tensioned components for flexure
55 trang 22 0 0 -
Ebook Earthquakes and acoustic emission
212 trang 22 0 0 -
Effect of loading rate on flexural behavior of concrete and reinforced concrete beams
8 trang 10 0 0 -
12 trang 8 0 0
-
Flexural performance of reinforced concrete beams made with locally sourced fly ash
13 trang 8 0 0 -
Empirical models of corrosion rate prediction of steel in reinforced concrete structures
10 trang 6 0 0 -
14 trang 6 0 0
-
14 trang 5 0 0
-
13 trang 5 0 0
-
22 trang 4 0 0