Ebook Helical piles: A practical guide to design and installation - Part 1
Số trang: 244
Loại file: pdf
Dung lượng: 5.38 MB
Lượt xem: 22
Lượt tải: 0
Xem trước 10 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
Part 1 of ebook "Helical piles: A practical guide to design and installation" provides readers with contents including: chapter 1 - introduction; chapter 2 - installation; chapter 3 - basic geotechnics; chapter 4 - bearing capacity; chapter 5 - pullout capacity; chapter 6 - capacity-to-torque ratio; chapter 7 - axial load testing; chapter 8 - reliability and sizing;...
Nội dung trích xuất từ tài liệu:
Ebook Helical piles: A practical guide to design and installation - Part 1
Nội dung trích xuất từ tài liệu:
Ebook Helical piles: A practical guide to design and installation - Part 1
Tìm kiếm theo từ khóa liên quan:
Helical piles Steel piling Basic geotechnics Bearing capacity Pullout capacity Capacity-to-torque ratio Axial load testingTài liệu liên quan:
-
Ebook Geotechnical engineering (Revised third edition): Part 2
537 trang 24 0 0 -
13 trang 22 0 0
-
Prediction of bearing capacity of shallow strip foundation: A case study in Binh Dinh-Vietnam
4 trang 20 0 0 -
Bearing capacity and failure mechanism of nonwoven geotextile reinforced clay: A verification
16 trang 11 0 0 -
Pullout capacity of batter pile in sand
8 trang 10 0 0 -
Ebook Helical piles: A practical guide to design and installation - Part 2
269 trang 8 0 0 -
Bearing capacity of shell strip footing on reinforced sand
11 trang 8 0 0