Effect of fly ash on the mechanical properties of mortar
Số trang: 4
Loại file: pdf
Dung lượng: 371.67 KB
Lượt xem: 12
Lượt tải: 0
Xem trước 2 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
Class F fly ash is used to replace the OPC on the mass basis of the total cementitious material (CM) at the replacement portion of 0%, 10%, 20% and 40% while the water and CM ratio is constant at 0.4. The flexural and compressive strengths of all mixes are determined up to 90 days.
Nội dung trích xuất từ tài liệu:
Effect of fly ash on the mechanical properties of mortar
Nội dung trích xuất từ tài liệu:
Effect of fly ash on the mechanical properties of mortar
Tìm kiếm theo từ khóa liên quan:
Fly ash Compressive strength Flexuralstrength The mechanical properties of mortar Cementitious materialGợi ý tài liệu liên quan:
-
8 trang 24 0 0
-
9 trang 22 0 0
-
Characteristics of fly ash from the municipal solid waste incineration plant in Can Tho
11 trang 22 0 0 -
10 trang 20 0 0
-
Effect of several fillers on some basic mechanical properties of asphalt concrete
8 trang 17 0 0 -
Bioactive glass 45S5 from diatom biosilica
7 trang 16 0 0 -
14 trang 16 0 0
-
Assessment of the use of raw fly ash with high loss on ignition in concrete
4 trang 16 0 0 -
Application of steel fiber-reinforced concrete for slab lagging at underground mines in Quang Ninh
6 trang 15 0 0 -
Effect of fly ash on physical and mechanical properties of mortar
4 trang 15 0 0