Features of the synthesis of calcium-aluminate phases with the introduction of modifying additives
Số trang: 8
Loại file: pdf
Dung lượng: 1.02 MB
Lượt xem: 11
Lượt tải: 0
Xem trước 1 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
In this work, the influences of boric acid and high alumina cement used as modifying additives on the formation of CaO∙Al2O3 and CaO∙2Al2O3 were studied. Herein, commercially available chalk of the M-90 label and technical alumina of the G-0 label were utilized as initial raw materials. Heat treatment of powder mixtures with various concentrations of modifying additives was carried out in the temperature range of 1250-1350oC with an isothermal exposure times of 1h and 2h. It was found that the addition of additives into the raw mixture affected the ratio of target phases and the temperature interval of the phase formation of calcium-aluminate minerals.
Nội dung trích xuất từ tài liệu:
Features of the synthesis of calcium-aluminate phases with the introduction of modifying additives
Nội dung trích xuất từ tài liệu:
Features of the synthesis of calcium-aluminate phases with the introduction of modifying additives
Tìm kiếm theo từ khóa liên quan:
Tạp chí Khoa học và Công nghệ Đại học Duy Tân Calcium-aluminate phases Heat treatment Boric acid High alumina cement Solid-phase reactionsTài liệu liên quan:
-
Biểu tượng hoa trong thơ haiku của Matsuo Basho và Yosa Buson
10 trang 231 0 0 -
Xây dựng ontology trợ giúp ra quyết định về đào tạo cho các trường Đại học ở Việt Nam
10 trang 174 0 0 -
8 trang 131 0 0
-
10 trang 96 0 0
-
Xây dựng hệ thống tích hợp liên tục nội bộ sử dụng công cụ nguồn mở Jenkins và Gitlab
11 trang 88 0 0 -
Biểu tượng trong một số tiểu thuyết về chiến tranh biên giới Tây Nam Việt Nam
12 trang 86 0 0 -
Đánh giá tính năng lớp phun hệ vật liệu gốm Al2O3 - TiO2
11 trang 53 0 0 -
Modernity in some of Kawabata's short stories
6 trang 39 0 0 -
10 trang 35 0 0
-
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
7 trang 35 0 0