Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria
Số trang: 17
Loại file: pdf
Dung lượng: 266.07 KB
Lượt xem: 53
Lượt tải: 0
Xem trước 2 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria. After this presentation you will be able to: list the control stability criteria for a Nyquist Plot; construct a Nyquist plot using MATLAB; identify if a system is stable by plotting system response on a Nyquist plot; use MATLAB to generate system Bode, Error and Nyquist plots given the script file. Please refer to the content of document.
Nội dung trích xuất từ tài liệu:
Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria
Nội dung trích xuất từ tài liệu:
Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria
Tìm kiếm theo từ khóa liên quan:
Lecture Automatic control systems technology Bài giảng Công nghệ hệ thống điều khiển tự động Automatic control systems technology Nyquist stability criteria Plot complex numbers The open-loop transfer functionGợi ý tài liệu liên quan:
-
Lecture Automatic control systems technology - Lesson 16: Basic control modes
30 trang 219 0 0 -
27 trang 209 0 0
-
Lecture Automatic control systems technology - Lesson 1: Introduction to control systems technology
28 trang 134 0 0 -
15 trang 52 0 0
-
Lecture Automatic control systems technology - Lesson 15: Bode plots of transfer functions
13 trang 45 0 0 -
Lecture Automatic control systems technology - Lesson 14: Transfer functions of DC motors
28 trang 45 0 0 -
Lecture Automatic control systems technology - Lesson 17: Combined mode control
28 trang 44 0 0 -
Lecture Automatic control systems technology - Lesson 2: Performance of control systems
30 trang 40 0 0 -
Lecture Automatic control systems technology - Lesson 21: Methods of system analysis
29 trang 39 0 0 -
34 trang 37 0 0