SONEPLEX T EST ACCESS UNIT

The Soneplex Test Access Unit (TAU) module is an optionalmaintenance device that provides monitor and intrusive testaccess to the DS1 channels in the Soneplex Broadband chassisbetween the high speed network interface modules and thelow speed DS1 distribution modules.
Nội dung trích xuất từ tài liệu:
SONEPLEX T EST ACCESS UNITSONEPLEX ®TEST ACCESS UNITThe Soneplex Test Access Unit (TAU) module is an optionalmaintenance device that provides monitor and intrusive testaccess to the DS1 channels in the Soneplex Broadband chassisbetween the high speed network interface modules and thelow speed DS1 distribution modules.ADC’s Soneplex system is the lowest total cost solution forcarriers to grow their T1 business services. Focused onproviding flexible, end-to-end solutions, the Soneplex systemsaves carriers money on T1-based services over fiber orcopper, using HDSL, ADSL, traditional T1 repeater or OpticalDS2 technology, in a single platform. From operations,maintenance, provisioning and high-speed backbone connec-tions to central office space and cabling, the Soneplex systemis designed to take costs out of today’s T1 delivery approach,adding profit to your bottom line. FEATURES • Provides bipolar access to DS1 signals • Allows monitor, drop and insert capability on any DS1 link • AMI or B8ZS line codes • Front panel controls and LED indicators • No provisioning or periodic maintenance required The Soneplex System from ADC. The T1/E1 Service Delivery Experts Soneplex Test Access Unit ® Drop and insert access is provided through Bantam jacks on the Soneplex Test AccessDescription Unit front panel and is controlled through the Main Processor Unit (MPU) craft inter- face. The TAU requires the B1 DS3 MUX and MPU software Version 4.2 or later or the SONET Processor Unit (SPU) Version 1.0. It mounts in the Soneplex EC1M/VTMM and Version 6 software and mounts into the Soneplex Broadband chassis slot labeled TAU in the high speed section. Two bantam jacks, labeled transmit (TX) and receive (RX) located on the front panel of the TAU provide a bidirectional industry standard interface to any one of the 28 DS1 signals. The interface may be used with 22 gauge plastic insulated cable (PIC) up to 133 feet in length. The access is configured through the craft interface for drop or insert of DS1 signals either toward the network or toward the customer for monitoring and intrusive testing. AMI or B8ZS line code may be selected by a push button switch on the front panel.Specifications Electrical Interface: Bipolar Power: 2 watts maximum DS1 Jack Access Type: Bantam Line Rate: 1.544 Mbls ± 100 ppm maximum Impedance: 100 Ω nominal Line Code: AMI or B8ZS; controlled by front panel switch Weight: 12 oz. (.34 kg) Dimensions (HxWxD): 9.5 x 9.9 x 1.0 (24.1 x 25.1 x 2.5 cm) Operating Temperature: -40°F to 149°F (-40°C to 65°C) Storage Temperature: -40°F to 158°F (-40°C to 70°C) Operating Humidity: 5% to 95%, non-condensingOrdering Description Catalog NumberInformation Soneplex Test Access Unit SPX-TAU0A1 ADC Telecommunications, Inc. P.O. Box 1101 Minneapolis, Minnesota 55440-1101 FAX: (612) 946-3292 From N ...