Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
Số trang: 12
Loại file: pdf
Dung lượng: 192.50 KB
Lượt xem: 12
Lượt tải: 0
Xem trước 2 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
This test method provides dc hysteresigraph procedures (B-H loop methods) for the determination of basic magnetic properties of materials in the form of ring, spirally wound toroidal, link, double-lapped Epstein cores, or other standard shapes that may be cut, stamped, machined, or ground from cast, compacted, sintered, forged, or rolled materials. It includes tests for normal induction and hysteresis loop determination taken under conditions of continuous sweep magnetization. Rate of sweep may be varied, either manually or automatically at different portions of the curves during measurement.
Nội dung trích xuất từ tài liệu:
Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
Nội dung trích xuất từ tài liệu:
Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
Tìm kiếm theo từ khóa liên quan:
Standard Test Method Epstein test Hall probe Hysteresis loop Ring-type specimen Direct Current Magnetic PropertiesGợi ý tài liệu liên quan:
-
Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
13 trang 22 0 0 -
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
7 trang 16 0 0 -
Standard Test Method for Lamination Factor of Magnetic Materials
3 trang 16 0 0 -
Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
4 trang 15 0 0 -
Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
17 trang 15 0 0 -
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
4 trang 14 0 0 -
Magnetic interaction effects in Fe3O4@CoFe2O4 core/shell nanoparticles
6 trang 14 0 0 -
11 trang 14 0 0
-
Standard Test Method for Ductility of Oriented Electrical Steel
2 trang 12 0 0 -
Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
5 trang 12 0 0