Utilising pet plastic and glass waste in manufacturing of masonry bricks
Số trang: 8
Loại file: pdf
Dung lượng: 777.86 KB
Lượt xem: 10
Lượt tải: 0
Xem trước 2 trang đầu tiên của tài liệu này:
Thông tin tài liệu:
This study also contributes to reducing environmental pollution caused by plastic and glass waste as well as current construction brick production methods. The results show that the bulk density, compressive strength, and bending strength of brick samples made from PET plastic and glass waste are higher than those of burnt clay brick samples, while water absorption is much smaller than that of burnt clay brick samples.
Nội dung trích xuất từ tài liệu:
Utilising pet plastic and glass waste in manufacturing of masonry bricks
Nội dung trích xuất từ tài liệu:
Utilising pet plastic and glass waste in manufacturing of masonry bricks
Tìm kiếm theo từ khóa liên quan:
PET plastic waste Glass waste Masonry brick While water absorption Bulk density Compressive strengthTài liệu liên quan:
-
8 trang 27 0 0
-
9 trang 24 0 0
-
10 trang 23 0 0
-
Assessment of the use of raw fly ash with high loss on ignition in concrete
4 trang 19 0 0 -
Application of steel fiber-reinforced concrete for slab lagging at underground mines in Quang Ninh
6 trang 18 0 0 -
11 trang 17 0 0
-
Effect of fly ash content on the compressive strengthdevelopment of concrete
6 trang 17 0 0 -
Investigating compressive strength of concrete containing steel fiber by data-driven approach
15 trang 16 0 0 -
Effect of fly ash on physical and mechanical properties of mortar
4 trang 16 0 0 -
Bioactive glass 45S5 from diatom biosilica
7 trang 16 0 0