Analog Modules - SM 332 analog output

The analog output modules convert digital signals from the PLC into analog signals for the process. The modules feature the following: Resolution from 12 to 15 bit Various voltage and current ranges: The ranges are set independently for each channel using parameterization software. Interrupt capability: The module transmits diagnostic alarm messages to the controller’s CPU in the event of errors.
Nội dung trích xuất từ tài liệu:
Analog Modules - SM 332 analog outputCA 01 Analog Modules - SM 332 analog outputAnalog Modules - SM 332 analog outputOverview Analog outputs For the connection of analog actuatorsApplicationAnalog output modules can be used to output analog signals from the PLC to the process. They are suitable for connecting analog actuators.FunctionThe analog output modules convert digital signals from the PLC into analog signals for the process.The modules feature the following: Resolution from 12 to 15 bit Various voltage and current ranges: The ranges are set independently for each channel using parameterization software. Interrupt capability: The module transmits diagnostic alarm messages to the controller’s CPU in the event of errors. Diagnostics: The module sends detailed diagnostic information to the CPU.Technical specifications 6ES7 332-5HB01-0AB0 6ES7 332-5HD01-0AB0 6ES7 332-5HF00-0AB0 6ES7 332-7ND02-0AB0Voltages and currentsLoad voltage L+ Rated value (DC) 24 V 24 V 24 V 24 VCurrent consumption from load voltage L+ (no load), 135 mA 240 mA 340 mA 290 mA max. from backplane bus 5 V DC, 60 mA 60 mA 100 mA 120 mASeite 1 von 3CA 01 Analog Modules - SM 332 analog output max. Power dissipation, typical 3W 3W 6W 3WConnection system Requisite front connector 20-pin 20-pin 40-pin 20-pinAnalog outputs Number of analog outputs 2 4 8 4; clock synchronous operation Length of cable shielded, max 200 m 200 m 200 m 200 m Voltage output, short-circuit Yes Yes Yes Yes protection Voltage output, short-circuit 25 mA 25 mA 25 mA 40 mA current, max Current output, open-circuit 18 V 18 V 18 V 18 V voltage, max.Output ranges, voltage 0 to 10 V Yes Yes Yes Yes 1 to 5 V Yes Yes Yes Yes -10 to +10 V Yes Yes Yes YesOutput ranges, current 0 to 20 mA Yes Yes Yes Yes -20 to +20 mA Yes Yes Yes Yes 4 to 20 mA Yes Yes Yes YesBurden resistance (in the nominaloutput range) at voltage outputs, min. 1 kΩ 1 kΩ 1 kΩ 1 kΩ at voltage outputs, 1 µF 1 µF 1 µF 1 µF capacitive load, max. at current outputs, max. 500 Ω 500 Ω 500 Ω 500 Ω at current outputs, inductive 10 mH 10 mH 10 mH 1 mH load, max.Analog value formationIntegration and conversiontime/triggering per channel with over-range (bits incl. 12 Bit; +/- 10 V, +/- 20mA, 4 to 20 12 Bit; +/- 10 V, +/- 20mA, 4 to 20 12 Bit; +/- 10 V, +/- 20mA, 4 to 20 16 Bit sign), max mA, 1 to 5 V: 11 bits + sign, 0 to 10 V, mA, 1 to 5 V: 11 bits + sign, 0 to 10 mA, 1 to 5 V: 11 bits + sign, 0 to 10 0 to 20 mA: 12 bits V, 0 to 20 mA: 12 bits V, 0 to 20 mA: 12 bits Conversion time (per 0.8 ms 0.8 ms 0.8 ms 200 µs; in clocked mode 640µs channel)Settling time for resistive load 0.2 ms 0.2 ms 0.2 ms 0.2 ms for capacitive load 3.3 ms ...