Effect and optimization of various machine process parameters on the surface roughness in EDM

(BQ) Electrical Discharge Machining (EDM) is a non-traditional machining process which is more efficient than traditional maching process due to ease of machining of difficult-to-machine materials with complex shapes. EDM is used for machining of toughened and high strength conductive materials which is hard enough to cut by traditional processes.
Nội dung trích xuất từ tài liệu:
Effect and optimization of various machine process parameters on the surface roughness in EDMAvailable online at www.sciencedirect.comScienceDirectProcedia Materials Science 5 (2014) 1702 – 1709© 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 20142211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014doi:10.1016/j.mspro.2014.07.359Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 170917031704Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 170917051706Shashikant et al. / Procedia Materials Science 5 (2014) 1702 – 1709