Danh mục

Bài giảng Nhập môn Kỹ thuật truyền thông: Bài 10 - PGS. Tạ Hải Tùng

Số trang: 21      Loại file: pdf      Dung lượng: 433.70 KB      Lượt xem: 20      Lượt tải: 0    
Hoai.2512

Hỗ trợ phí lưu trữ khi tải xuống: 9,000 VND Tải xuống file đầy đủ (21 trang) 0

Báo xấu

Xem trước 3 trang đầu tiên của tài liệu này:

Thông tin tài liệu:

Bài giảng "Nhập môn Kỹ thuật truyền thông: Bài 10 - Không gian tín hiệu PSK (Phase Shift Keying)" trình bày các nội dung chính sau đây: Đặc điểm của 2-PSK; 2-PSK dạng sóng truyền; Xác xuất lỗi 2-PSK;... Mời các bạn cùng tham khảo!
Nội dung trích xuất từ tài liệu:
Bài giảng Nhập môn Kỹ thuật truyền thông: Bài 10 - PGS. Tạ Hải TùngNhập môn Kỹ thuật Truyền thông Phần 2: Các kỹ thuật điều chế số (Digital Modulations) Bài 10: Không gian tín hiệu PSK (Phase Shift Keying) PGS. Tạ Hải Tùng 12-PSK: characteristics1. Bandpass modulation2. One-dimensional signal space and antipodal binary constellation (equal to 2-PAM)3. TX filter p(t)cos(2f0t)4. Information associated to the carrier phase = Phase Shift Keying 22-PSK: constellationSIGNAL SET M  {s1 (t )   p(t ) cos(2 f 0t ) , s2 (t )   p(t ) cos(2 f 0t ) } Information associated to the impulse amplitude BUT we can also writeSIGNAL SET M  {s1 (t )   p(t ) cos(2 f 0t ) , s2 (t )   p(t ) cos(2 f 0t   ) } Information associated to the carrier phase 32-PSK: constellation Versor b1(t)=p(t)cos(2πf0t) (d=1)VECTOR SET M  {s1  ( ) , s2  ( )}  R s 2     0 s1     b1 (t ) 42-PSK: binary labeling(example) e : H1  M e(1)  s1 e(0)  s 2 0 / s2 1/ s1    0    b1 (t ) 52-PSK: transmitted waveform m  2  k 1 R  Rb T  Tb  Transmitted waveform s(t )   a[n]b (t  nT ) n  1 where a[n] { ,  } b1 (t )  p(t ) cos(2 f 0t ) 62-PSK: transmitted waveform 1 f 0  2 Rb example for p (t )  PT (t ) T  T 1 1 0 1 0 0 1 1 .2 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 -0 .2 -0 .4 -0 .6 -0 .8 -1 .0 -1 .2 0 1 2 3 4 5 6 7 8 t/T 7 2-PSK: bandwidth and spectral efficiencyCase 1: p(t) = ideal low pass filter  f0 f0 R RTotal bandwidth Bid  R  Rb(ideal case)Spectral efficiency Rb id   1 bps / Hz(ideal case) Bid 8 2-PSK: bandwidth and spectral efficiencyCase 2: p(t) = RRC filter with roll off   f0 f0 R(1) R(1)Total bandwidth B  R (1   )  Rb (1   )Spectral efficiency Rb 1   bps / Hz B (1   ) 9ExercizeGiven a bandpass channel with bandwidth B = 4000 Hz, centred around f0=2 GHz, compute the maximum bit rate Rb we can transmit over it with a 2- PSK constellation in the two cases:• Ideal low pass filter• RRC filter with =0.25 102-PSK: modulatorThe transmitted waveform is given by s (t )   a[n]b1 (t  nT ) nWhere b1 (t )  p(t ) cos(2 f 0t )Then we must generate s (t )   a[n] p (t  nT ) cos(2 f 0 (t  nT )) n We choose f0 multiple of R=1/TIt follows cos(2 f 0 (t  nT ))  cos(2 f 0t  2 f 0 nT )  cos(2 f 0t )Then we can generate   s (t )    a[n] p (t  nT )  cos(2 f 0t )  n  11 2-PSK: modulator ...

Tài liệu được xem nhiều: